1. Introduction
Process Engineering provides the information related to the actual process what is going to happen. Other downstream departments use the information provided by Process department in their design. Process Department generates the below listed deliverables:-
· Documents
· Drawing
2. DOCUMENTS
2.1 REPORTS
§ Process Study Report
§ Basis of Design
§ Site Visit Report
§ Design Review Report
§ HAZOP Report
§ Design Review Closeout Report
§ HAZOP Closeout Report
§ Operating, Control Safeguarding Philosophy
§ Safeguarding Memorandum – update
§ EORD – update
§ Plant Operating Manual – update
§ Equipment List
§ Line List
2.2 CALCULATIONS
§ Separator Sizing
§ Pump Calculations
§ Relief Valve Calculations
§ Line Sizing
§ RO Sizing
2.3 INFORMATION PACKS
§ Design Review Information Pack
§ HAZOP Review Information Pack
§ IPF Review Information Pack
2.4 DATA SHEETS
§ Vessel
§ Control Valve
§ Pump
§ Storage Tank
§ Flare
§ Filter
§ Heater
§ Relief Valve
3. DRAWINGS
§ PFS (Process Flow Scheme)/PFD (Process Flow Diagram)
§ PEFS/P&ID (Construction)
§ PEFS/P&ID (Demolition)
§ PSFS
Comments